HELP !!! Oil Pipe of Turbine !!! R19 16S

[renault19_16S_Brasil]

Help !! where I I pull the oil for the turbine? And Where I the puncture for return of the oil of the turbine? I have R19 16S - Engine F7P
pls. send my howto or photos..

Tks
Igor

[jeroen.k]

This is how they did it with the K-tec turbo conversion

[img]http://www.k-tecracing.com/products/r19 ... ersion.jpg[/img]

Maybe you can replace your oilfilter and tap the oil there?

But I think this picture shows enough already to?

[Menno]

The oil supply you take with a T-piece under the pressure sender. The return you have to drill into the sump.

[renault19_16S_Brasil]

Ok !! I understand !! I will put here?? which is hole? ehehe
[img]http://www.renaultclub.com.br/modules/c ... block1.jpg[/img]
[img]http://www.renaultclub.com.br/modules/c ... block2.jpg[/img]

Tks
Igor

[Menno]

The oil supply comes from the right hole, on the lower picture.

The return will be in the sump, not in the block.

[renault19_16S_Brasil]

The oil supply comes from the right hole, on the lower picture.

The return will be in the sump, not in the block.

Ok Im undestand.. But.. in the Right hole have a sensor..
what is sensor?? Oil temp?

And Return.. where? under block? or in block?
where in red cicle ??
[img]http://www.renaultclub.com.br/modules/c ... engine.jpg[/img]

Igor

[Matijs]

All the info you need is in the picture you post.
Oil return to the carter, and a T-section splits off the oil feed from the sensor.

[Riël]

You see the t-piece right inder the piece of downpipe.

[renault19_16S_Brasil]

Hi Guys. Today I maked a hole in block and put T-piece in oil sensor. I will post the photos..

Igor